PFCs & Universal Beams
Parallel flange channels and universal beams held in the sizes residential and light-commercial work keeps asking for, racked and ready to cut at Eagle Farm. Anything outside that range we supply made-to-measure.
Steel Supply Specialists · Brisbane
Custom Steel Beams in Brisbane
Every beam we send anywhere in Brisbane is racked, measured and cut at our branch at 1113 Kingsford-Smith Drive, Eagle Farm: parallel flange channels and universal beams from stock, made-to-measure lengths to your engineer's schedule, and raw, prime painted or hot-dipped galvanised finishes. This page is the starting point for the whole service line, and it links to a page for each of the suburbs we supply most.
- 3 days Typical supply
- PFCs & UBs Stocked on site
- Made to size Cut to your spec
- Eagle Farm Local branch
Made to Measure
Stock sizes and specialist sizes, matched to your project
A steel beam order in Brisbane is rarely just a beam. It is a bearer for a house going up on new posts, a lintel over a widened opening, a floor beam where a wall is coming out, or a mezzanine member in a shed near the airport. What arrives on site has to match the drawings, carry the finish the location calls for, and turn up when the trades are ready for it. That is the job this branch is set up for.
We hold parallel flange channels and universal beams in the sizes residential and light-commercial work keeps asking for, and we cut specialist made-to-measure lengths to whatever your drawings call for. Every order is read against your drawings and cut to spec, so what arrives on site fits the first time: no rework, no waiting on a second delivery.
Why Builders Choose Us
About Brisbane
Brisbane's housing stock sets the shape of the work. Across the older inner and northern suburbs the house is a Queenslander or a timber cottage, and the defining trait of that style is that it was built on stumps, raised off the ground, so a large share of what we supply is the posts and bearers that go under those houses when they are restumped, raised or built under. The post-war brick suburbs bring a different order: a lowset house being opened up, where a beam takes the load of a wall that is coming out. And the industrial estates along the river and around the airport ask for heavier sections, mezzanine beams and canopy steel. Brisbane sits on a tidal river that runs out to Moreton Bay, so near the water the finish matters as much as the length.
Finishes to Suit the Job
Raw steel, prime painted, hot-dipped galvanised and pre-drilled. Prime paint for members that finish up enclosed and dry; hot-dipped galvanised for anything exposed to weather or sitting in a ventilated underfloor, especially near the bay or the river.
Fast 3-Day Supply
Three days from order to delivery or collection is typical for stock sections. Galvanising is a separate coating process on its own queue, so a member going out hot-dipped needs to be flagged early in the program, not in the week it is needed.
Made-to-Measure
Specialist lengths cut to your spec, alongside the full run of standard stock dimensions. Send the engineer's schedule, a marked-up sketch, or simply the sections and lengths, and tell us whether a length came off a drawing or off the house.
Expert Advice
We are a locally owned and operated business, and the team will talk through sections and finishes with you at the counter. We supply and cut to your engineer's schedule. We do not size or certify structural members. That stays with your engineer. But we will flag anything in a schedule that looks transcribed wrong before we put a saw through it.
Keen Local Pricing
Specialising in steel supply for the trades keeps our prices sharp and our turnaround quick, and because every beam is cut at Eagle Farm there is one short run between our racks and any site in Brisbane, or no delivery leg at all if you collect.
What We Supply
Experts in the supply of Steel Beams and other steel products
Whether you are a builder, architect, or homeowner, our steel is supplied for precision, safety, and strength. Common stock lines and options span:
- PFC (parallel flange channel)
- Universal beams (UB)
- Raw steel
- Prime painted
- Hot-dipped galvanised
- Pre-drilled
- Stock sizes
- Made-to-measure
Our highly knowledgeable team is familiar with the uses and applications of all the steel products we carry, and will be more than happy to help you choose the ideal sizes and finishes for your specific Brisbane project. Alongside beams, the branch carries the wider run of building steel, from posts and plates to bracing, RHS and SHS, pipe and deformed bar, so most projects can be sourced from a single supplier with one delivery.
Frequently Asked Questions
What does your team supply in Brisbane?
We supply steel beams for a wide range of building applications across Brisbane and the surrounding areas, covering both standard stock sizes and specialist made-to-measure lengths. Alongside beams, the Eagle Farm branch carries steel posts, plates, bracing, RHS and SHS, pipe and deformed bar, so most projects can be sourced from a single supplier with one delivery.
Can you provide made-to-measure steel beams?
Yes. Send your engineer's beam schedule, a marked-up sketch, or simply the sections and lengths, and we cut to it exactly. If a length is coming off a site measure rather than a drawing, tell us. It changes how much tolerance we leave you.
What types of steel beams do you stock?
Parallel flange channels and universal beams across the sizes that residential and light-commercial work calls for, held in stock and ready to cut. Anything outside that range we supply made-to-measure.
What finishes or preparation options are available?
Raw steel, prime painted, hot-dipped galvanised, and pre-drilling to your hole layout. The general rule is galvanised for anything exposed to weather or sitting in a ventilated underfloor, and prime painted for members that finish up fully enclosed and dry. Follow your engineer's notes, and call us if they are not clear.
How quickly can I get my steel beams after ordering?
Three days from order is typical. Stock sections can be quicker, and galvanised members take longer because the coating is a separate process, so order those as early in your program as you can.
Do you offer delivery as well as pickup?
Both. We deliver across the Brisbane metro area, or you can collect from Eagle Farm between 6:30 am and 3:00 pm on weekdays. If you are having steel delivered, tell us what the access looks like when you order. Knowing that before we load is much better than discovering it when the truck arrives.
Areas we serve
Steel Beams across Brisbane and surrounds
From our conveniently located branch at Kingsford-Smith Drive in Eagle Farm, we supply quality steel beams across Brisbane and beyond. Each suburb below has its own page, written for the kind of steel that suburb actually orders. Suburbs we regularly supply cover:
Get in touch
Free quote
Contact our Steel Beams team in Brisbane
Let us be your local steel supplier in Brisbane. We offer quoting, fabrication, and delivery across the metro area for builders, architects, and homeowners alike. Send through the drawings for your Brisbane job, including the finish if your engineer has nominated one, and we will price it the same day. If you are collecting, the branch opens at 6:30 am and closes at 3:00 pm, so ring ahead if you are cutting it fine. Request your free quote today.