PFCs & Universal Beams
Parallel flange channels and universal beams held in the sizes bayside residential work keeps asking for (deck bearers, verandah beams, subfloor members) ready to supply from Eagle Farm, twenty minutes down Nudgee Road.
Steel Supply Specialists · Brisbane
Custom Steel Beams in Sandgate
We are Brisbane's specialists in supplying high-quality steel beams for residential, commercial, and industrial projects. Sandgate sits on the bay, so the steel we send there is specified for salt air as much as for span: galvanised where it counts, cut to length, delivered fast across the bayside and the wider metro area.
- 3 days Typical supply
- PFCs & UBs Stocked on site
- Made to size Cut to your spec
- Eagle Farm Local branch
Made to Measure
Stock sizes and specialist sizes, matched to your project
We are the Sandgate area specialists in the supply of top-quality steel beams for a wide range of building applications. Bayside work is rarely standard (a Shorncliffe cottage on old stumps, a deck facing the water, a ground level being rebuilt after flooding), so alongside our stock range we cut specialist made-to-measure lengths to whatever your drawings call for, at some of the keenest prices in the Brisbane area.
Every order is read against your drawings and cut to spec, so what arrives on site fits the first time: no rework, no waiting on a second delivery. On a bayside job we will also check the finish against your engineer's notes before we cut, because near the water the difference between prime paint and hot-dipped galvanised is the difference between a beam you forget about and one you revisit in a few years.
Why Builders Choose Us
Quality steel, supplied promptly across Sandgate
Through a deliberate focus on supplying steel beams and other products for the building trades, we provide the steel you need at the prices you like, backed by a team that knows the applications inside out, including what a marine atmosphere does to steel that was specified for an inland suburb.
Finishes to Suit the Job
Raw steel, prime painted, hot-dipped galvanised and pre-drilled. Close to the foreshore most exposed members go out galvanised, because the zinc protects cut ends and edges, not just flat faces.
Fast 3-Day Supply
Three days from order to delivery or collection is typical. Galvanising runs to its own queue, so flag a galvanised member early in your program rather than in the week you need it.
Made-to-Measure
Specialist lengths cut to your spec (posts and bearers for restumping, beams to carry a floor where a wall is coming out) alongside the full run of standard stock dimensions.
Expert Advice
Our supply team knows the uses and applications of everything we carry, and will talk through whether a member is genuinely exposed, sheltered, or somewhere in between before you commit to a finish.
Keen Local Pricing
Specialising in steel supply for the trades keeps our prices sharp and our turnaround quick, and keeps a short, direct run between our racks and a Sandgate site.
What We Supply
Experts in the supply of Steel Beams and other steel products
Whether you are a builder, architect, or homeowner, our steel is supplied for precision, safety, and strength. Common stock lines and options span:
- PFC (parallel flange channel)
- Universal beams (UB)
- Raw steel
- Prime painted
- Hot-dipped galvanised
- Pre-drilled
- Stock sizes
- Made-to-measure
Our highly knowledgeable team is familiar with the uses and applications of all the steel products we carry, and will be more than happy to help you choose the ideal sizes and finishes for your specific Sandgate project, particularly where a member sits in a ventilated subfloor, under a deck, or anywhere it will see salt-laden air off the bay.
Frequently Asked Questions
What does your team supply in Sandgate?
We supply steel beams for a wide range of building applications across Sandgate and the wider Brisbane area, covering both standard stock sizes and specialist made-to-measure lengths. A lot of our bayside work is the kind you never see once it is finished: posts and bearers for restumping, subfloor members, framing for ground levels being rebuilt. Alongside beams, our branch carries a broad run of steel products for the building trades, so most projects can be sourced from a single supplier with one delivery.
Can you provide made-to-measure steel beams?
Yes. Send your engineer's beam schedule, a marked-up sketch, or simply the sections and lengths, and we cut to it exactly. Older Sandgate and Shorncliffe houses are rarely square, so if a length is coming off a site measure rather than a drawing, tell us, because it changes how much tolerance we leave you.
What types of steel beams do you stock?
Parallel flange channels and universal beams across the sizes that residential and light-commercial work calls for, held in stock and ready to cut. Anything outside that range we supply made-to-measure.
What finishes or preparation options are available?
Raw steel, prime painted, hot-dipped galvanised, and pre-drilling to your hole layout. Near the water the general rule is galvanised for anything exposed to weather or sitting in a ventilated underfloor, and prime painted for members that finish up fully enclosed and dry. Follow your engineer's notes, and call us if they are not clear.
How quickly can I get my steel beams after ordering?
Three days from order is typical. Stock sections can be quicker, and galvanised members take longer because the coating is a separate process: order those as early in your program as you can.
Do you offer delivery as well as pickup?
Both. We deliver across the bayside, or you can collect from Eagle Farm. If you are having steel delivered, tell us what the access looks like when you order: older Sandgate streets are narrow and plenty of blocks have one tight side path with a fence and a meter in the way. Knowing that before we load is much better than discovering it when the truck arrives.
Areas we serve
Steel Beams across Brisbane and surrounds
From our conveniently located branch at Kingsford-Smith Drive in Eagle Farm, we supply quality steel beams to Sandgate and a wide area of Brisbane and beyond. The bayside run out through Nudgee Road puts us about twenty minutes from a Sandgate site. Suburbs we regularly supply cover:
About Sandgate
Sandgate is a bayside suburb about 18 km north of the Brisbane CBD, sitting on Bramble Bay alongside Shorncliffe, Brighton and Deagon. It is one of Brisbane's older seaside settlements, and the housing stock reflects it: timber cottages and Queenslanders on stumps, many of them now being renovated, raised or restumped rather than replaced. Two things shape the steel that goes into them: the age of what is already standing, and the salt in the air. Both are why so much of what we send to Sandgate leaves the yard hot-dipped galvanised and cut to a length taken off the house itself.
Get in touch
Free quote
Contact our Steel Beams team in Sandgate
Let us be your local steel supplier in Brisbane. We offer quoting, fabrication, and delivery across the metro area for builders, architects, and homeowners alike. Send through the drawings for your Sandgate job (including the finish, if your engineer has nominated one), and we will price it the same day. Request your free quote today.